Cars & Trucks Logo

Related Topics:

A
Anonymous Posted on May 01, 2013

Dodge durango seatbelt stuck in retractor - Cars & Trucks

5 Related Answers

Anonymous

  • 405 Answers
  • Posted on Dec 28, 2008

SOURCE: 2003 dodge durango stuck in park.

it is your interlock solenoid or switch on your brake pedal. This keeps you from starting your car in anything but park.

Ad
co7196

Ned C Cook

  • 3433 Answers
  • Posted on Aug 02, 2009

SOURCE: 2006 Dodge Durango stuck in neutral

front pump failure or valve body internal leakage. Trans pn needs to be lowerred to ck and at a shop. Sorry

Anonymous

  • 1 Answer
  • Posted on Jul 05, 2010

SOURCE: The front passanger automatic seat-belt retractor

I got te same problem. I could not solve the problem. Did you solve the problem? how?

Anonymous

  • 4803 Answers
  • Posted on Oct 08, 2011

SOURCE: Looking for info on repairing or replacing

Hi Dennis,
You may be out of luck. Here's the problem: The manufacturers are only required to supply parts for the vehicles they sell for 10 years. The aftermarket companies do not want the liability involved in building seat belt units that are "vehicle specific", although you can find many that will sell "universal" units with a HUGE DISCLAIMER as to the fit and/or safety of using them on any particular vehicle. The salvage yards are forbidden by law in most states to resell any used ones from wrecked cars. However, you may find a salvage yard operator that will "turn his head" if you decide to take one out of a car.

If you want to replace your seatbelt retractor with one like the vehicle was originally equipped with, you must try and get your local dealer to try and find one for you. I have had some luck finding seat belt parts for older cars by going through the dealer, but many times we had to make concessions due to availablility - like replacing a tan-colored seat belt with a blue one because that was the only color available.
If you can get your hands on the part, I would be happy to give you instructions on how to install it if you need.

Anonymous

  • 6468 Answers
  • Posted on Oct 12, 2012

SOURCE: 2005 Chevy Malibu Maxx is throwing codes for both seat belt retractors is there a way to troubleshoot this?

no because a volt meter uses power and that can blow off the charge they did have connector problems so look close to them

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How to Reset airbag light

  • Most likely you replaced the clock spring and air bag module right? Well when the srs deploys you also have seatbelt pre-tensioners that are part of the whole retractor assembly and cannot be repaired. Ie either side retractors are not working right , then you need to replace according to chrysler corp.
0helpful
1answer

BeltAlert fuse

I just reached under seat and found the wire connector that comes from seat buckle end and unplugged it.
0helpful
1answer

Seatbelt stuck

Replace the belt and retractor.
0helpful
1answer

Drivers seatbelt is fully extended

My first try is always:
tap lightly & carefully on the retractor housing while pulling & releasing tension on the seatbelt.
If that doesn't work:
Blow compressed air into the retractor mechanism (they accumulate dirt/lint).
If that doesn't work:
Disassemble (and clean) the retractor mechanism. Reassemble with a bit of white lithium
grease lubricant (to prevent a recurrence). This is a bit of work, but it'll always work.
2helpful
2answers

How can I un-stick a stuck seat belt. It worked fine last time we used it and does not seem to be twisted. 2001 chevy blazer

If it is stuck in the seat belt clip (meaning its buckled) then that model year had a seat belt buckle recall for failure. If its stuck in the seatbelt retractor and your seatbelt retractor is floor mounted there is a release pin on the ratchet gear. TO access it you will need to remove the plastic cover located at the floorboard next to the door on the side of the car that is stuck. If its a seat mounted retractor this means the retractor mechanism is located within the seat frame. You will need to view the bottom of the seat of the belt and see the anchor point. Seatbelts must be anchored to frame of car. Trace it into the seat back. If its located in the back of the seat you will need to remove the seat cover to the extent to reach the mechanism. This can be located at the bottom of the seat.. but more than likely is located at the shoulder area. The Seat cover (fabric) is removeable via clips located at the base and tucked into the seat (think hidden bra/pant clip style connectors or zipper) If you have leather seats it is a bit more detailed and more difficult to manage the seat covers. Typically your local Chevrolet dealer mechanic can get this done in 10 minutes (based one experience) and quite possibly wont charge you or charge you minimally. The downside to this is if its locked that means the same gear that locks it in an accident was frozen in place somehow and this typically indicates a dirty dirty spring or broken spring mechanism. The locking pin operates on centrifugal force and activates based on speed by which the seat belt is pulled out. (just a bit of knowledge) Good luck
0helpful
1answer

Rear passengerside seat belt stuck in retracted position,cannot raise rear seat to upright position. how do I fix it?

You will most likely need to replace the seatbelt retractor. The best place to find a replacement is usually your local self service auto salvage lot. I replaced mine last year and it ran me $10 for the retractor and u pull and pay.
0helpful
1answer

Somehow a passenger of mine managed to get the

Check the owner's manual. There is usually a release for the headrest hidden under it. If not, you may need to remove the back seat by pulling it away from the back of the car.

Another fix if all else fails is to carefully remove the trim panel where the seat belt retractor is and then disconnect the retractor, reclaim the belt and then securely refasten it.
0helpful
1answer

01 dodge ram passenger side seat belt won't release

SOUNDS LIKE THE RETRACTOR HAS JAMMED..I WOULD NOT RECOMMEND TRYING TO TAKE APART AND TRYING TO RELEASE IT..IT'S A SAFETY ITEM AND SHOULD BE REPLACED
3helpful
2answers

Airbags were deployed now seatbelts won't work is there a sensor or are they made to spring

when airbags deploy there are seatbelt sensors in some vehicles.
1helpful
1answer

Saturn vue 2007, rear folding seat will not return to proper position due to seat belt being locked up.

They have a problem with the seatbelt retractor getting jammed up causing the belt to jam & not let the rear seat fold back up.The easiest way to get the seat back up is to cut the seatbelt & fold up the seat.Then the rear seat needs to be disassembled to gain access to the seatbelt retractor assy which has the seat belt made on.Hopefully it's still under warranty or Ext. warranty.hope this helps
Not finding what you are looking for?

677 views

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...