Where can i find the break bleeder valve on a hyundai

SOURCE: ticking valve hyundai lantra

They have solid lifters with different sized shims that sit in the lifter (referred to as shim and bucket design). Need to measures shim to lobe clearance and replace with different sized shim as necessary

SOURCE: Topping up gearbox oil on 99 Hyundai Lantra (manual)

You can actually do it from the top if it is similar to a 2001 Elantra??? On your right center of the tranny, there should be two big bolts I believe a 17mm one on the bottom left the other top right of the other. The bottom left is the drain plug the top right is where you fill it. If you want to make things easier you can remove the air cleaner and the air cleaner housing then unscrew the sensor on top of the tranny you can poor it in from the top. You will need to then unscrew the fill hole (Top right bolt) Pour the lube in to the hole where you had taken out the sensor until it pours out of the fill hole. Sounds like more work but by doing this you will avoid making a mess trying to fit the squeeze bottle into the tiny hole. Hope this makes Sense????

SOURCE: gear box dip stick location- hyundai lantra automatic

try the left side of the engine... gear oils smell are diffent from the engine oil and the viscosity... gear oils are thicker... u wont go wrong on this...

Johnny Brown

• 5763 Answers
• Posted on Dec 05, 2010

SOURCE: I recently replaced all of

the brakes need to be broken in, if you are pushing the pedal hard to try to stop, if the pedal just goes down on normal breaking then theres a problem, make sure the pads are sliding freely, if the pads are tight on the bracket then the bracket needs to be cleaned and lubed, this will make the pedal drop lower than normal, theres no other reason, you never opened the bleeders the pedal should be good, make sure the pads slide freely,

SOURCE: 1997 Hyundai Lantra - Dash lights don't come on with headlights

Check the fuse. Also make sure your dimmer for the dash lights does is not turned all the way down. If all that checks out, your dimmer may be need replaced.

Testimonial: "Haven't replaced dimmer yet but it sounds like that maybe the problem."