Question about 2000 Buick Park Avenue

1 Answer

1998 Buick Park Ave Speedometer stopped working.

Sunday last, I changed the Serpentine belt on my 98 Park Ave and had removed the battery (for more elbow room). Got everything back together and the gas gauge didn't work, which I corrected with the magnet. Two days later, the wife called me and said that now the speedometer does not work. Suppose the magnet made that stop working? It worked before I did the work and it worked the day after that.

Posted by on

  • 18akey Jan 28, 2009

    1991 buick park ave speedmeater not working

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Found the problem with the speedometer on my Buick. When you use the magnet to fix the gas gauge, will can and may affect your speedo. So use the magnet trick on it as well. Appears that the manufacturer didn't think about the needles being able to swing past the magnet they have set up in the gauges. Should have put a stop pin on the gauges.

Posted on Jan 28, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I take out the power steering ump to replace a serpantine belt in a 98 buick park ave?


Vin K or Vin 1 ?
Removal Procedure
The accessory drive belt drives all engine mounted accessories. All driven accessories are rigidly mounted to the engine. Drive belt tension is maintained by a spring loaded belt tensioner. A belt squeak when the engine is started or stopped is normal and has no effect on belt durability. The drive belt tensioner can control belt tension over a broad range of belt lengths; however, there are limits to the tensioner's ability to compensate. Using the tensioner outside of its operating range can result in poor tension control and/or damage to the tensioner.
Important: Ensure that the wood block extends past the width of the oil pan in order to avoid damage.
  1. Use a jack with a block of wood on the jack under the oil pan in order to support the engine.
  2. Remove the engine mount to engine mount bracket nuts.
  3. Remove the engine mount bracket front upper and lower nuts.


Remove the engine mount bracket front upper and lower studs and spacer.
Lower the engine as necessary and rotate the tensioner to remove the drive belt.
Remove the drive belt.
Don't need to remove power steering pump if done right !

Oct 18, 2016 | 1998 Buick Park Avenue

1 Answer

How to replace serpentine belt for 98 buick park ave supercharged


there is a tensioner pulley with a place to put a ratchet loosen tension and remove make sure you have a diagram to put belt back on if not draw a picture before removing

Feb 14, 2011 | 1998 Buick Park Avenue

1 Answer

1998 Park Avenue: where is the fuse box on a 1998 buick park ave?...


i have a 98 buick park avenue
i got a problem running it. it start but when i hit the break pedal some light comes out the direction signal and it shuts off i check all the fuse

May 17, 2010 | 1998 Buick Park Avenue

1 Answer

98 park avenue how to install new serpentine belt


should be a lable under the hood. if not, search serpentine belt routing 98 park ave on google images. should pop right up

Apr 14, 2010 | 1998 Buick Park Avenue

1 Answer

How do i install serpentine belt on a 1998 buick park ave? also belt tensioner how do i adjust?


  1. there should be a place on the tenshoner pully to put a ratchet and tale tenshon off the pully then follow the routing diagram for the belt on the radiator suport pannel on the front of the car

Mar 09, 2010 | 1998 Buick Park Avenue

1 Answer

How do I change the serpentine belt on a 1996 Buick Park Ave.?


one of the pullys should be a tensoner....use a strong bar and take the tenson off the belt remove the belt and do the same thing when u put the new belt on

Nov 18, 2009 | 1996 Buick Park Avenue

2 Answers

Replace 2000 buick park ave serpentine belt


Firt - study & write down (draw) the belt path,,
and be sure about it..

Then - put a wrench on the nut in the center of the tension pully.. Move the tension pully to loosen the belt.. Pull belt off..

Repeat to put new one on..

Should be pretty easy..

Jul 09, 2009 | 2000 Buick Park Avenue

1 Answer

Belt replacement on park ave 98


some models you do not remove anything some have a spacer on the motor mount

Mar 08, 2009 | 1998 Buick Park Avenue

Not finding what you are looking for?
2000 Buick Park Avenue Logo

913 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

67912 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22011 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6817 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...