SOURCE: fan belt tenshioners out of other models that would fit a audi
I'm not sure that there would be any other types that would suit, and the parts should be readily available. check the Dayco Webcatalogue, it even has pictures of the tensioners so you can see that you are getting the right one. Just click on the magnifying glass symbol beside "auxiliary tensioner" once you have the correct model loaded to access the pics.
Hope this helps,
Mark.
SOURCE: how do i fit a fan belt on a audi a4 1.9tdi
im trying to upload a pic of the belt routing it wont let me email me i can send it to you [email protected]
regards John
SOURCE: serpentin belt diagram
for the most part there is a diagram under the hood showing you how to install your drive belt but give these website a try www.autozone.com if they have your car listed you be able to get picture as well as diagram showing you how to repair your car here is the other one its www.alldatatadiy.com and i hope i have been able to help you Michigan Man.
SOURCE: replace belt serpentine audi a8 2006
relatively easy. just weave the belt over, under and around the pulleys the way its show on the belt patter on the label on the radiator., or make note before pukking off old one. Good luck. Watch the fingers!
SOURCE: I have a Audi A4 1.9 tdi 1997, the fan belt has
it a bit of a simple drawing but thats how it go's hope this helps
712 views
Usually answered in minutes!
×