Question about Hyundai Motor 1999 Elantra
Bottomed out backing out of driveway on curb. Died but started immediately up. Unfortunately won't idle now. Have to keep rpms up. Thinking I might have a vacuum line come off.
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Try shaking the ICM connector see if it effects engine operation if it does inspect for looseness and poor terminal contact,these have a know connection problem especially 1,3,6 connections these are known as (COP) coil on plug
Posted on May 08, 2011
This is indication of faulty MAF sensor.
Its located on the air inlet, look and the air filter box and follow it to the engine there inline you will see the mass air flow sensor and the air intake temp sensor is built into the mass air flow sensor. when you locate the air filter box you will see the maf sensor its bolted to air box.Make sure the connector is good and also the wiring.Remove the MAF sensor, clean it and recheck.Also try driving without MAF sensor.If its revs fine, then its faulty MAF.-------
This should help.Thanks.Helpmech.
Posted on May 19, 2011
The 'Keyless Entry & Burglar Alarm System" is activated. You must 'Disarm' the system using the Keyless Entry Remove (Key Fob) to "Reset" the system. The reason the engine won't start is due to the burglar alarm - it has a "Starter Kill" circuit which is activated when the alarm is activated. The alarm must be DEactivated to DEactivate the 'Starter Kill' circuit.
Another way to start the engine is to get in the car, put the key in the ignition and turn it to 'ON" and wait 3 to 5 minutes until the emergency flashers stop/turn off. Afterward, you should be able to start the engine. NOTE: This does NOT reset the burglar alarm. It will go off again when you enter the vehicle without using the remote/key fob.
Posted on Sep 06, 2011
Tips for a great answer:
Mar 07, 2014 | Hyundai Elantra Cars & Trucks
Nov 21, 2012 | 1995 Hyundai Elantra
Sep 19, 2012 | Cars & Trucks
Feb 16, 2012 | 2000 Hyundai Elantra
Apr 19, 2017 | 1991 Eagle Talon
Sep 20, 2011 | Chevrolet Tahoe Cars & Trucks
Jul 28, 2011 | 1995 Pontiac Firebird
Jun 23, 2011 | 1994 Oldsmobile Cutlass Supreme
53 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: