At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
My horn keeps going off. I was able to get it to go off by pushing the horn inside the car but this time I had to disconnect the battery.I need to know how to disconect the horn from a 2001 mitsushi monterro limited with 4 wheel drive.
Take the cover off the center of the center of the steering wheel and disconnect the black wire that runs to the cover be careful with air bag while your doing this
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Check your fuses. It varies from car to car but you may have a fuse dedicated only to the horn unit. In that case you can just pull the fuse without affecting anything else..
Other than that you will need to pull the wiring connectors off the horn unit and tape them up to keep any moisture and dirt out. Hopefully that will not trigger any issue with the security system.
Hi Matthew,
I believe your horn is not any more working, Might the circuit inside the horn seized,it has a limit time for use. Try if you do have any other to confirm the failure.
Normally there is a horn relay, try replacing that. The contacts can weld together and keep the horn on. If you take the relay out and leave it out, you won't have a horn but at least it won't be blowing all the time.
have a look under the bonnet (hood) at the front of the car and you will see the horn or horns,just disconnect the wires and they wont work,or remove fuse for horn
Hot wire the horn to the battery if it works, check the horn relay. You may also have a disconnect inside the horn button in the steering wheel, if the relay does not get a signal from there it won't work either. If you are going work inside the wheel, get a manual to guide you through airbag cautions and removal.
keep the steering wheel in one spot, do not rotate, check horn by pressing pad in different areas. If it is intermittent then horn pad is concern. If it works well trying slowly turning steering wheel while pressing horn pad if there is a point in turning the wheel where horn becomes inop, then the common fault is the horn contact ring inside of the steering column
×