SOURCE: Front-left Outer CV Shaft Disconnected from inner-CV shaft
If memory serves me right the axel is bolted to a plate on the front differenchel and a large nut on the end that goes thru the hub bearing, if you take the whole shaft out( both ends) i see no problem running it temporary without it.
SOURCE: '95 tahoe making noise when accelerating; sounds
no it should not spin when is in 2wd thanks
SOURCE: My 2001 silverado w/69,000 miles has no light indicating 2 or 4 h
THE TRANSFER CASE MOTOR IS NOT WORKING TO INGAGE 4 WHEEL DRIVE. CHECK WITH DOOR OPEN WHEN YOU PUSH 4 WHEEL SWITCH YOU SHOULD HEAR MOTOR INGAGE 4 WHEEL DRIVE. IF YOU HEAR MOTOR BUT STILL NO 4 WHEEL DRIVE THE GEAR ON MOTOR COULD BE DAMAGED. REPLACE TRANSFER CASE MOTOR.
SOURCE: can i drive my 1999
Yes you can. It's not recommended, but should not cause any problems, as the front drive shaft is not used during 2wd operation.
SOURCE: 2000 suburban 4wd-drive train vibration
Have you had all the wheels balanced? Have you checked for a bent axle?
137 views
Usually answered in minutes!
×