Car runs well but when you pull up it stalls starts straight away no problems if you take it out of gear while driving engine stalls if you go down through the gears its fine ???/
SOURCE: 99 dodge ram 1500 5.2 liter stalling on start up.
Check and clean idle air control valve
check for vacuum leaks
suspect idle air control valve
SOURCE: Suzuki Grand Vitara 2.0 litre
Same problem for me. The car would idle at about 2500 when started from cold and about 3 miles on would not idle at all, resulting in the revs dropping off when changing gear or stopping. Also rather jerky in top gear unless thrashed - numerous trips to the garage for air idle valve, injectors etc. but still a problem! Have just found out that GVs are a bit prone to carbon build up in the throttle body - mine was almost blocked - it now feels like a different car.
SOURCE: engine stalls when put into gear, idle fines in park
This is a comon problem with GM cars.Most likely cause is the torqe converter clutch lock up solenoid.
SOURCE: Vibration when in gear, and stalling.
The problem is the torque converter solenoid. I had it happen on my 94 Cavalier a few years back and was a cheap fix at the local car mechanic. What happens is the transmission warms up and hits a certain speed where the solenoid engages, but then it sticks and won't disengage until it cools down sufficiently. When it sticks, it causes the car to shake when slowing down and will snub out the engine if you come to a stop.
SOURCE: Car hesitates/stalls when engine is warm and car starts to move.
Sounds like a bad motor mount, pop the hood and see if the motor shakes or moves rapidly when u put it in gear holding down the brake.
131 views
Usually answered in minutes!
×