Fuse panel layout on 1999 dodge ram 1500 - Ram 1500 Dodge Cars & Trucks

SOURCE: 1999 Dodge Ram 1500 2WD won't shift properly

Sounds like the speed sensor on the rear axle.

SOURCE: 1998 Dodge Ram 1500 back up lights

The back up /neutral switch is on the left side off the transmission.
Go on your back under the car (steerside) and there it as.


Greetings .
Victor

SOURCE: Dont know what kind of Transmission my dodge has

ON THE BOTTOM OF THE TRANY THERE IS A TAB ON THE SIDE OF THE TRANY ON THE BOTTOM LIP WHERE THE FILTER PAN IS BOLTED THE NUMBERS ARE STAMPED ON THE TRANY HOUSING ON THE BOTTOM NEXT TO THE PAN

SOURCE: 1999 Dodge Ram 1500 Pickup error code p0171

This code means that system to lean, bank 1.
some of the possible causes to make this code set are
1. intake or exhaust leak,
2. problem with the air system.
3. MAF (Mass Air Flow sensor)VAF sensor (Volume air flow sensor)
4. fuel pressure/pump
5. injector(s)
6. HO2S (Oxygen sensor)

SOURCE: 99 dodge ram interior lights wont come on

I had the same problem and could not understand why I THOUGHT I checked all the fuses, but there is a fuse on the drivers side which is covered by a black thing (no idea why). It is listed as IOD or something. If you lift the black thing up and remove the fuse you will notice it is blown. Replace this and all will be well again.