Question about Cars & Trucks

Open Question

Where is the egr valve located on a 2008 charger 3.5

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

ZJLimited
  • 17970 Answers

SOURCE: egr valve location on dodge ram 2005 4.7

The EGR, or exhaust gas recirculation valve, takes inert exhaust gasses drawn from the exhaust system and reintroduces them into the combustion chamber through the intake manifold. This process lowers the peak combustion temperature and helps combat the formation of Nitrous Oxide (NOx) in the exhaust.

f0255cf.jpg

  1. Separate the intake ducts from the air cleaner assembly by loosening the retaining clamps and pulling the ducts away from the housing.
  2. Disconnect the vacuum line from the air cleaner assembly.
  3. Remove the wing nut that secures the air cleaner housing lid to the base.
  4. Remove both the air cleaner hosing lid and base.
  5. Locate the EGR valve. Look at the front of intake manifold. The EGR valve will be bolted to the intake manifold just in front of the carburetor.
I hope help you with this. Good luck.

Posted on Sep 07, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Location of the EGR valve for yaris year 2008 as engine is misfiring and scanner indicate EGR faulty. Is it possible and if there is one


The egr valve should be located on or very near the inlet manifold it usually has a stainless steel pipe running towards it these can be cleaned and that's where the fault may lie with it as they clog up and stop working usually if the egr valve is flogged up you may need to check the inlet manifold as this gets worse than the egr aswell at the same time

Apr 16, 2015 | 2008 Toyota Yaris

1 Answer

Ford focus 2008 egr valve 1.6 diesel


I found 3 sources, Supaprice.Co.UK, Ebay/UK and Amazon/UK for an initial search.

Just go to your Browser and type "2008 Ford Focus 1.6L diesel egr valve" or add UK to the field and run a search. There were more than the 3 results I mentioned

You may have success by looking up the Toll free numbers of Autozone, Oreilys, or Advance autoparts and ordering Internationally.

I hope my solution is helpful, please rate.

Nov 05, 2012 | Cars & Trucks

1 Answer

Auto part store says there is no egr valve on 08 dodge ram 1500 4.7. True?


25 - Emissions Control/Exhaust Gas Recirculation, Gas/VALVE, Exhaust Gas Recirculation (EGR), 4.7L/Removal REMOVAL collapse.gif Labor Operations: Click to display a list of Labor Operations associated with this procedure

2431021.jpg The electronic EGR valve and solenoid assembly is attached to the rear of the left cylinder head. An exhaust gas routing tube connects the EGR valve to the intake manifold.
1. Use a diagnostic scan tool to record any Diagnostic Trouble Codes (DTC). 2. Remove the throttle body resonator. 3. Perform the fuel system pressure release procedure (Refer to 14 - Fuel System/Fuel Delivery - Standard Procedure) 4. Disconnect and isolate the negative battery cable.


2430847.jpg 5. Disconnect the power brake booster vacuum hose (1) and the vapor canister purge hose (2) at the intake manifold.


2430720.jpg 6. Disconnect the EGR valve solenoid electrical connector (1).


2430801.jpg 7. Remove the EGR valve assembly retaining bolts (1). 8. Remove the EGR valve and the EGR routing tube from the engine as an assembly. 9. Remove and discard the metal gasket located between the cylinder head and the EGR valve assembly.


2433378.jpg 10. Remove the EGR valve routing tube retaining bolts (1) at the EGR valve assembly 11. Remove the EGR valve routing tube and discard the gasket.

Feb 14, 2012 | 2008 Dodge Ram 1500 2WD

1 Answer

I was replacing an air filter on a 2008 HHR with a 2.2L engine. I realized that there is oil on the air filter & in the housing. I am trying to locate the EGR valve so that it can be replaced. The...


The EGR valve is not likely to cause the issue you describe. The EGR is an exhaust gas recirculation valve. Because of the heat of the exhaust gasses involved, if oil were to get into the EGR passage, it would harden and turn ot carbon deposits. Your most likely candidate is the PCV valve, generally located on the valve cover.

Aug 09, 2011 | Chevrolet HHR Cars & Trucks

1 Answer

Cannot find egr valve on 2008 f-150 flex 5.4 where is it ?


Hi,

Improve the Fixya.com experience for everyone by voting!



Your EGR valve is located on the throttle body. Sorry but I don't have a picture of the location in my data base. However, it looks like the following:



[Sorry they won't let me post the photo]

Click on this link for a photo of what the EGR valve looks like. Photo of EGR Valve



If you received a code warning, you might want to consider the following:

The last time this problem occurred I cleaned the throttle body and it was completly clogged in the farthest port from the EGR and almost closed at the closest port to EGR.

All the best

Ben

Jun 06, 2011 | 2008 Ford F-150

1 Answer

Where is the egr valve on a 2005 dodge 1500 5.7L


The electronic EGR valve and solenoid assembly (3) is attached to the front of the right cylinder head (1). An exhaust gas routing tube connects the EGR valve to the intake manifold.

2efe0f8.gif

Disconnect electrical connector (1) from EGR solenoid (2). Remove two bolts (3) connecting EGR tube (4) to valve assembly. Remove gasket located between EGR tube flange and EGR valve assembly.

Remove two mounting bolts (2). Separate valve assembly (3) from cylinder head (1). Remove and discard metal gasket located between cylinder head and valve assembly.
The new EGR valve will come with a new metal gasket. You can reuse the smaller gasket for the metal pipe going to the egr valve as long as its not damaged.

TY for using Fixya; remember rated this post.

Apr 14, 2010 | 2005 Dodge Ram 1500

2 Answers

Where is EGR Valve located on a 2006 dodge charger 3.5L pic would be helpful


to find the egr valve you will have to remove the purge soleniod from the bracket.

1. EGR tube
2. EGR Valve



8cd5dac.jpg

Oct 04, 2009 | 2006 Dodge Charger

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

80 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...