Relic Watches - Page 3 - Recent Questions, Troubleshooting & Support
Battery size for relic watch. On the back it says ZR11586 then *300210.
Christopher, Neither of these is a battery number. Open the watch and remove the battery. (Gently.) Copy the number(s) on the battery, using a magnifying lens if necessary.
Log onto eBay and search for "[the number] battery". Example: AG10 battery. I've never found one yet that was not available. And they are quite inexpensive--I usually buy more than one.
Battery for relic wet or 15478 and how to remove back of watch
Watch back will almost certainly need a dedicated wrench to loosen and unscrew it. Sometimes considerable force is needed and in that case a watch repairer would remove the strap and fit the watch into a bench-mounted holder.
Once the back has been disturbed the water resistance cannot be guaranteed unless it is pressure tested after refitting.
Motorcycle clock
I have one of these, the cruiser version with passenger seat. It was a take apart nearly everything situation to get to the battery. on the right side of the motorcycle (throttle side) you should find two very small screws. remove these. I the cover should come off. If it doesn't come off easily, loosen the kick stand plate a bit. Inside you will now find the clock back. two small screws. remove them and the cover and you should be able to get at the battery. good luck
I'm from India and I have an Relic (Bought from
Most probably its battery problem. You can go to any reputed (Titan, Timex) watch showroom and get its battery replaced. They will change the battery immediately.
Don't get the battery replaced from the small watch repair shops. They don't have original batteries, so your battery will not last long.
Hope it helps. Don't forget to rate me. Thanks for using FixYa.
Not finding what you are looking for?