Victor4727
Please make a direct deposit acct: 4727 186211795
Main spring repair...
A professional watchmaker can replace the mainspring and clean and lubricate your watch for you.
Hope this helps,
Ken
Yellowstone Watch, Inc.
www.yellowstonewatch.com
Watch winding is not holding
Two words: Wind it! When any self-winding (automatic) watch runs down from not wearing it you have to manually wind it to get it going again. Once you've done that the movement of your wrist will cause the self-winding rotor mechanism to keep it running as long as you are reasonably active and wear it everyday. Just wind it about 40 turns and you'll be good to go. Oris is a great watch company and you should enjoy it for many years.
Something on the face
take it back to the shop it could be flurescent paint or dust thats got in through the crown on the side but you dont want it getting in the movement any descent watch repairer can do this task it should take no longer than 1hr..to do this job your watch will also need resealing for its water restance to be ok ask if they have a print out with the test result for this task as some of the older water resistant chambers dont have this option its peace of mind .
The hand for
To find a registered repair person in your area.
GOTO:
http://www.watch-clock-makers.org/
Hope this tip helps.
r/ David
http://antiqueclock.clockstop.com/
TTI DIVER BEZAL
GOTO
http://www.watch-clock-makers.org/
Hope this tip helps.
r/ David
http://antiqueclock.clockstop.com/
Not finding what you are looking for?