kawasaki Televison & Video - Page 5 - Recent Questions, Troubleshooting & Support

The cable supplied with the player splits the audio feed from a single audio jack to dual RCA jacks for connection to a standard VCR or TV. The video appears to be a straight RCA to RCA type connection where a standard cable can be used.

See the users manual here:

http://www.1800customersupport.com/productdocuments/PVS10921%20Product%20Manual.pdf

Dan

Try moving the lense assembly outward towards the edge of the player. May take a few tries.

Plug the fat cables into the monitors on the bottom, and then to the player in the D shaped holes. Plug the 12V (car) adapter into your car's power outlet and then to the player in the small hole that may be marked AC/DC in. There's only one hole that will work - can't mess it up.

A couple things, try another disk; check the disk for scratches or dirt; restart. Good luck.

try cleaning the lens with a dvd lens cleaner from any electronic store

Well the actually the player isnt working.

If you get no video output, and the wires are hooked up correctly, then the video output circuits are bad and the unit will need replaced. Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/sean_54c3a3dc48a7773c

You set has a possible failure of the optical head , which could have gone weak. First of all you need to open the set and look inside the tray that holds the CD. If you notice there is a small eye like lens that sticks around a black module. Use a good cotton swap to gently clean this lens to poilish it with care. Thereafter after cleaning connect the set and put in an original cd that has no scratches. If you have an head cleaner try to use it provided it is of a good quality. If this does not solve, then I sugggest that you will need to replace the optical head. You will have to take out the optical head unit after disassembling the mechanism. Procure the same type spare from an authorised centre. Using a non static soldering irron remove the bridge across the PCB before you install. If you are not familiar seek expert help as an inexperienced work might result in failure of the sensitve device. after fixing the spare , replace all the removed parts carefully. Now you can test. I hope my adivce helps. Good Day

maybe theres a loose connection on the wiring inside the dvd.or loose connection between optical lens and to the empig board.just check them.

good day just look for an electronic store near you and ask for the chord ,so you can fix it,

Hi, Unfortunately, this blue screen of death indicates a hardware failure. You need to get the unit repaired. However, looking at the cost of the new players, it is not recommended to get it repaired. That's something different if you want to get this fixed as you want to gain some knowledge or experiment or have taken the task as a challenge. If you wish to repair, you need to have some electronics background to read schematics,should know soldering and would be able to keep all precautions. If you want to get it fixed by DIY ( do it yourself ), you could revert and i would be glad to follow up. Let me know,if needed further assistance. Hope i helped you. Thanks for using ' Fixya ' and have a nice day!!

check on radio shack

It should take about 1 hour or 1 1/2 hours depend how good ur battery is.

Tries websites like Amazon.com,Ebay.com.

Hi,

Have you tried to unplug and plug in the Device after few minutes, say 30 minutes?If not, try it.

It is quite a common problem with this model, you can try a clean on the lens,you can use a DVD cleaning kit which you can buy from Radio Shack or similar or you can clean manually.

To clean manually unplug from wall and leave two minutes.Remove cover identify the lens as a small round glass lens in the DVD tray assembly.Clean with the glass lens with a cotton bud or similar, use a small amount of isopropyl alcohol or do the clean dry, any other cleaning product could damage the unit.Remove any foreign objects in the unit.Reassemble and test

If no luck then you will need a new laser assembly I'm afraid.



It's not worth it as the Cost of ONLY lens would be around $100. ( Original ).

Now, regarding Caps. Yes, it could be another Problem. When you Open the Player, you would see Caps like :-




If you see, Cylindrical Type Components, all those are Caps. There might be chance that any one of these could be Leaked / Bulged / Swelled. Make sure that there is no Cold Solder Joint and there is no other Broken Component on the Board.

If you find anything Swelled / Leaked / Bulged, you could De Solder and Re Solder the New Caps. The caps could be easily available in the Market. You could buy it Online or you could go to Radio Shack, Fry's.Make sure to Buy a Similar one. I have seen , if you buy a Low Quality Cap, it could again Swelled or Blown.Usually Bad Caps have Ammonia Kind of Odor.

The Cost of Caps would be less than $20.

I hope that the above information would be useful for you to Resolve the Problem.

Let me know,if needed further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

After checking with a number of parts replacement sites unfortunately it doesn't look like anyone is stocking replacement screens for your particular model. A number of them do stock parts for model #'s (all start with PVS unless otherwise noted) 10921, 1963, 1665, 32801, and 1080. None of those is a direct replacement for your model.

Another avenue to explore would be to find a used unit like yours that you could strip for parts. I wasn't able to find any listings in any of the North American sellers sites including the big one such as eBay and Amazon. As this model was sold in Europe you might want to try some of your local websites. I must apologize for not being able to provide you with better news.

This sounds like a stuck lid switch, much like what you find on a laptop. Look for a little button close to the hinges and tap it to see if its stuck. This player just isn't old enough to have a dead backlight yet.

hello,
you could search for from www.olx.com, or bestbuy.com better still try to check an electronic store close to you.

goodluck

No disc error is usually caused by dirty optical lens or a faulty lens. Turn it off, unplug it, then try cleaning it with a very soft dry cloth and then try playing a cd which has no scratches.



The blue color part, that's called optical lens. It looks like a glass but its not a glass, its a plastic cap for the laser to go thru to read the discs. Never apply any wet solutions on it. Just use a soft dry cloth to rub off the dirt on it.

Might be dirty or scratched DVD. Have you tried other disks. If they play well, disk is damaged.

Read Ya,
Z