Question about HRA-4100B 4 Channel 400 Watt Mosfet Car Amp Car Audio Amplifier
power light keeps on blinking then amp turns off when i turn up my radio the power light starts to blink and then the amp turns off. can it be the remote wire being to thin. or the power cord from the
Wiring Diagram I have one of these units however the wiring diagram sheet on the unit is ripped does anyone have a diagram they could send me please. Can anyone help?? Did you get this figured out?
Question about 2 12in Subwoofers loaded in Bandpass Enclosure Car Speaker
Hitron 600w 12' subs in a bandpass box What would be the correct amp wattage for 2 12's in a BP box. They're 600w peak. i think u mean ohms,amp wattage?wat r u trying to do>?
Question about 2 12in Subwoofers loaded in Bandpass Enclosure Car Speaker
2 12" Hitron 600w subs in a BandPass box What would be the correct amp wattage for 2 12's in a BP box. They're 600w peak. Remember that driving a load with an underpowered amp will probably cause more
Question about HRA-2200B 2 Channel 400 Watt Mosfet Car Amp Car Audio Amplifier
...2) 8 ohm subs down to a 4 ohm? is there even a way to get tham down to 4 ohms? All you need to do is wire your 2 subs together in parallel. This means Hooking the positives of both subs together, as ...
...2 10" Infinity 1052w subwoofers. Im new to car stereo setups so Im wondering if this would be a good amp for this setup (plus other stock speakers in car if need be). I'm happy I can help a newbie. I ...
...be just about right for each. If you are wiring the 2 subs in parallel and powering them with a single channel amp, then a 700 watt bridged would also work. Good luck and thank you for using
Question about HRA 2500B 2 Channel 500 Watt Mosfet Car Amp Car Audio Amplifier
hitron hra-2500b amp turns on then turns off My Hitron hra 2500b amp turns on...give it a second and turns right back off. Ivan it be fixed Make sure that you are not over loading the amp. Example - ...
Question about 2 12in Subwoofers loaded in Bandpass Enclosure Car Speaker
can two sub woofers on a Sony 6.2 be connected into one input on an amp what is the impedance and power of the amp?
Question about HPA600.2
My amplifier has power through the power cable, the ground is solid, and the fuses are all in working condition. My light on my amp is not illuminating and the amplifier is not powering my sub. What ...
Usually answered in minutes!
1 Questions
1 Questions
1 Questions
1 Questions