Questions & Answers for: Acura wheel nut

...wheel. There is one castle nut per ball joint, should have a cotter pin through them, take them off and beat the ball joint out with a hammer, don't hit the stud or you'll never get the nut back on. ...

Ad

Question about 2002 MDX

2 Answers

front rotors replacement Take off wheels.. Take off calipers.. Take off center nut.. Pull rortor off.. Replace.. Hope this helps !! rate me good ;o) how can i replace my front rotors honda accord ...

Ad

...you support it firmly with jack stands for safety and do this work on a nice level spot with the wheels firmly chocked to prevent any shifting of the car, you wouldn't want it fall on you while

...wheel-nut. Loosen the strut bolts. Remove the ball-joint boltand nut. Disconnect the steering tie-rod, and push it out it's place. Take out the strut bolts. Finally take out the hub assembly. If you ...

Question about 1991 Integra Hatchback

1 Answer

...them out with a hammer and then 'press' the new ones in by using shims and a old wheel nut to pull them back into the hub with an impact gun. I believe on that car the wheelbrearings are pressed

Question about 1997 CL

1 Answer

nut on center of steering wheel , use puller kit from local auto parts store , prob wont come off on its own but might .   BEFORE removal note location of scratch on wheel , matching scratch

wheel The large nut you see is most likely the axle retention nut. It is NOT used to hold on the wheel. The wheels on a 2000 Acura TL are secured to the wheel hub by 5 lug nuts. If after removing the

...nut shoulder (B) against the driveshaft. Clean the mating surfaces of the brake disc and the front wheel, then install the front wheel with the wheel nuts. Turn the front wheel by hand, and make sure ...

...wheel assembly up with one arm and wiggled the strut free with the other. Trust me, you don't want to do it that way.) You get the ability to adjust it up or down depending on what you need it to do. ...

...placed in gear makes a loud grinding sound, the vehicle shakes and shutters when driving ? ARE THE WHEEL LUG NUTS TIGHT! Poss Brakes grinding the rotors. Any burning smell? CK THOSE TIRES & ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

1999 Acura TL
1999 Acura TL

415 Questions

2000 Acura TL
2000 Acura TL

424 Questions

1997 Acura CL
1997 Acura CL

419 Questions

1991 Acura Legend
1991 Acura Legend

283 Questions

Top Acura Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

926 Answers

Are you an Acura Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...