Questions & Answers for: Pentair turn off

...is with it. I assume this is the case. When you turn the spa off make sure you turn the heater off first and then wait a few minutes before turning off the spa pump. Also, check your

off. It would only turn on for intervals of a minute or so and shut off. New motor placed in today is running very hot, it ran for about 1.5 hours and turned off. after about 15 minutes I turned it on

...will turn on and operate fine but when you turn the switch to off the heater keeps running and will not shut off. check temp sensor on control if one attached if no control check heater temp ...

...turn off using the thermostat or the on/off switch. I have a pentair minimax 250 ch. Yesterday I noticed that the pool water was warmer than normal. I went to check the heater thermostat and tried to ...

...off, wait a few minutes, turn back on, then go out to the pool panel and restart the system.....it worked! I had a Hayward Pool Bride Comm error code and pool pump did not start. When I manually try ...

...heater will not turn off Does it not shut off at all? This heater has probably been "rigged", and is extremely hazardous in this condition. Turn off the gas supply and get a pro to check it

...on back of motor while off then turn on sometimes it will work if not need new motor You need a new capacitor. Happens all the time on my route and its always the same thing. ...

...turn off. After changing the thermister and resting power, display quickly read "r=5" then "126" which is where it is today. Display still won't turn off. those readings are not error codes. if ...

...off then turn multiport to back wash turn back on let run until the backwash glass is clear turn off then turn to rinse turn back on for about 20 sec then turn off then turn multiport back to filter ...

turn off and then turn back on . why ? make sure you have the correct light highlighted What light are you using? Incandescent color wheel, or led color changing? With pentair leds, a series of on and