Questions & Answers for: Whirlpool Cabrio top plate

...plate they spin out of the top and fall over the side, this is because socks and underwear are either overloaded or spun out, this can be solved by reducing the load size and also spinning small ...

replacing wash plate Model wtw660sbt. I have the new wash plate. How do I remove the old wash plate? Thanks. Hate to iron. You just have to take the cap off the center of the wash plate it pops off. ...

...top and pull it out of the washing machine. Maybe you'll find enough change to buy a coffee. There is also a plate held by two 1/4" screws at the back. You might remove those screws and see if there ...

...They don't use an agitator like a conventional washer. They have a movable wash plate located in the bottom. ...

...top of the tub) after removing the recirculating hose on the left rear corner. Then remove the center cap on the wash plate(agitator)you'll see a 7/16 bolt through the center remove that and pull the ...

There is a piece of clothing stuck inside the tub, caught between the two drums. you have to find one of two ways to remove the upper part of the machine.First, unplug the machine from the power ...

...top cover ,just clips on outer tub. pry loose center cap in center of wash plate remove bolt holding wash plate pull out wash plate..then just pull up on wash basket nothing holding it ( its designed ...

motor running and shaft turn but the bowl not moving The clutch plate has broken & needs to be replaced.

...plate the barrel... We can't figure out how to get to it? You can look between the tub and drum by raising the top of the machine and taking off the tub ring. To raise the top you unscrew the top ...

top plate. Remove the 6 screws. Pull the inner tub completely out. Take note of the location and position of the teflon gear. Check the filter. And count how many items of clothing you just found from