...hook you may need to adjust timing. But most commonly thread breaks because of improper tension, threading, needle or thread
why does my thread keep breaking out of the needle try rethreading machine top thread tension to tight needle damaged thread & needle may not be compatable--here's how to check Cut 6-8 inch piece ...
...tension to tight================loosen tension 1 turn 2.Machine improperly threaded=========check threading 3.Thread twisted on guide post========" 4.Thread twisted out of tension=======" 5.Take up ...
...disk/spring assembly is mounted on, and breaks. If I tighten the tension setting very tight before threading the thread breaks due to to much tension. I cannot see how to correct this there is a lot ...
...narrow of an eye can shred the thread causing it to break. Next, check anything along your threading process that could be catching or snagging the thread. A worn or chipped thread guide can ...
top thread breaking The needle thread breaks 1. the needle thread is not threaded properly 2. The needle thread tension is to tight 3. The needle is bent or blunt 4. The needle is incorrectly inserted
Question about CN2053R1 Sewing Machine
...is too tight or the machine is threaded incorrectly. Check your owner's manual and be sure you are threading everything correctly. When threading the upper thread, FIRST RAISE the presser foot so
Question about CN2053R1 Sewing Machine
Thread on my consew 225 keeps balling the thread on the bottbottom Sounds like bird nesting. The upper thread accumulates under the fabric creating a series of loops and knots. First: Install a brand ...
Question about CN2053R1 Sewing Machine
Consew machine. My bottom thread has ball knots on the bottom. I have changed the needle and the top stitch is perfect. Please advise. Re-check the thread that is knotted. It's most likely the top ...
Question about CN2053R1 Sewing Machine
I'm having issues with my last spool of thread not joining with the other threads when I start sewing I have a tuffy lock Consew Serger, model #94. I have threaded it to the manufacturers instructions
Usually answered in minutes!
124 Questions
84 Questions
19 Questions
22 Questions
17 Questions