Questions & Answers for: GE tact switch

...the front control board and see if that stops the scrolling. If it does, check all of the small tact switches or the remote sensor. If that does not help, you might have a shorted microprocessor ...

...I do not have the remote. How do I fix this. Lynn, common problem on your chassis, problem is the tact switches are no longer available, (I checked and the remote is NLA also), the good news is any ...

...tact switch) is stuck on (shorted or changed value). In order to temporarily correct the problem remove the Ch up switch that is located on the front panel control board - it would have to be ...

...panel, (tact switches). Replace the switch panel to fix the fault. Spares can be aquired through your GE dealer. Visit GE's web site for a list of dealers and spare parts suppliers. Hope this

...tact. During the cycle, the motor just osillates a minute amount in both the clock and counter clockwise rotation. it might be the safety switch under the door. it is a switch that will not allow the ...

tact switch it is already dirty and contacts.The vibration of the sounds triggering the tact switch when the sound is producing a bass. Replacing the tact switch will resolve the problem. Good day and

...continuously after the set clock message appears. On many models of microwave oven means a problem with the touch panel, (tact switches). Replace the switch panel to fix the fault. Hope this