Questions & Answers for: Toyota 4Runner replace switch

ignition switch replace iginition switch module--the key will only go 1/2 way in... SOMETHING WRONG WITH THE SWITCH, IF THE WIRE CONNECTED RIGHT.

...switch to get it to start. Unlike other posts, mine doesn't get stuck in the "acc" position. I've already tried other keys, and this usually works, but that's not working on first shot now. Your ...

...in the steering column? i would try replacing the switch, i had a 4 runner do the same thing and i replaced the switch and the problem went

...like a bad ground, OR the wiring harness to the ignition switch / headlights switch is bad. I just replaced mine because the interior lights kept blowing a fuse and the clock did not work.

replace the switch. If it is anything like my 87 4Runner, the switch is pretty worn out anyway. I just replaced the switch wiring harness in mine. Get a new switch and a Haynes manual at an auto parts

...to be close enough to the pedal arm so that when the brake is pressed, the switch plunger makes contact. If it looks this is already happening, replace the switch and adjust the new switch as

How do I know if an oil pressure switch is bad? Oil light is coming on, and vehicle stalled. Plenty of oil. You can either replace the switch or use a mechanical gauge to check the actual oil pressure

replace the stop light switch on a 1986 toyota 4runner brake lights dont work. this is the last thing i know to do Move into a position where you can easily see underneath the driver's side of the

...replace hatch opener on 2007 4runner You need to remove the vinel panel from the rear hatch.Peal back plastic from access hole. Remove 4 hexnuts that hold the tag light , hatch switch and window ...

My power window and door locks fuse keeps blowing. Power windows and locks stopped working. Replaced fuse(30A) and blew again. Brought to mechanic, looked for a short, ended up replacing the master ...