Questions & Answers for: Pontiac Grand Am replace low beam bulb 2005

Question about Pontiac Grand Am

1 Answer

...lights except low beams, even brights work! most cars have a fuse or relay for high and low. if they are good test your bulbs then check or replace your dimmer which is in the multifunction ...

Ad

...check continuity from one of connector to the other end no reading, replace harness check this sight out www.racinglab.com/headbulwirha.html before we go on does the low beam on the other side

Ad

Question about 2001 Grand Am SE

2 Answers

...low beam lights work, but when i turn the high beams on, the lights get extremely dim. the original headlights that were on it, only had one bulb for both the high and low beams, and the new lights ...

Question about 2003 Grand Am

1 Answer

...low beam is bad. Your fix is to replace the headlight connector. How: buy a replacement headlight connector at your favorite auto parts store, cut off the old connector, then (a) solder and ...

Driver side headlight does not work when i put the lights on low. When the high beams are turned on the light works fine. your low beam bulb is bad replace the bulb its high and low beam in one bulb

...low beam even after changing bulbs. Check that you have got the correct bulb for the one you replace . They both look the same but one has a single filiment for high beam only while the other will ...

...low beam is out ... I have a 2003 Pontiac Grand Am with a headlight issue. The brights work, and the drivers side low beam works, but the passenger side low beam is out. I had someone tell me it was ...

low beam does not work, but the high beam does. Everything on the right side works fine. I have a Brand New left side headlamp assembly and bulb. I checked and replaced fuses and circuits and they are

replace light bulb in a 2004 Pontiac Grand Am headlight low beam replacement hope this helps, if its just the bulb that needs to be replaced then try this Sylvania 9007 Basic Headlight Contains 1 Bulb

Question about 2004 Grand Am

1 Answer

work while in low beam switch position and low beams work while in high beam switch position If you have two bulbs then you could have them switched. You could also have the single bulb in upside down

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...