Questions & Answers for: Honda GL 1200 Interstate Gold Wing remove baffles

Change the driving light bulb on a vintage Goldwing. The driving light kit light bulb positioned under the head light. see three screws on out rim of headlight remove screws

After I get the starter bolts out, it seems that I don't have enought room to remove the starter. I have done everything in the manual and it doesn't seems to work. Do I have to remove the exhause ...

...need to replace the ignition switch. What has I need to replace the ignition switch. What has to be removed in order to remove the switch? The top yoke needs to come off as the switch is held in with ...

...on 1986 goldwing 1200, it is beside the headlight. Does anyone know how to get it out? you have to remove the head lights as a set the maker light are part of the assemble. remove the grill just ...

can baffles be removed on a 1985 1200 goldwing interstate no they are welded in

start runs wants warm up dies wont start experienced similar problem (1990 1500se)-removed carbs-repaired slides-yes they can be repaired, thoroughly (replaced no carb parts) cleaned ...

...1985 and newer have them on the front. I am confused!! Thanks Doug SORRY TO SAY BUT YES YOU HAVE TO REMOVE ENGINE TO REPLACE PART DID MINE LAST SUMMER GET REPAIR BOOK  PLAN ON TWO DAYS WORK JUST ...

remove speedometer from GL 1200 i would like to change my speedometer from Mph to kmh how to change the faceplate? Hi, Anonymous for this scenario you will need your service, parts fiche, and owners ...

remove baffles Hi, Anonymous for more information about your question and valuable "FREE" downloads that you will need for viewing and printing please click on the blue links below. Good luck and have

best way to replace speedometer cable How to replace speedometer cable most cable drives for speedos are replaced by removing the cable from the drive end ( not the instrument end) and pulling the ...