Questions & Answers for: GMC pulley belt

...belt slips off idler pulley I went to start my 1994 5.7L with A/C suburban the other day and the serpentine belt slipped off of the idler pulley. I put it back on and tried to start it again and the ...

Ad

...belt and return the pulley slowly to its original position. Do not let the pulley snap back into position as this may damage the belt and pulley. Check that the belt is properly seated in each

Ad

Question about 2004 Envoy

1 Answer

...Pulley that the belt will go on. b. Using the Diagram: Install the new Serpentine Belt on the remainder of the Pulleys....over, under, left right. c. Using a Serpentine Belt Tensioner Tool or Wrench ...

Belt tensioner. 2) Idler Pulley. 3) Crank Pulley (Vibration Dampner) sounds like somthing is out of line ,remove belt and check all the pulleys spin freely and without noise,also when a belt overheats

...Pulley that the belt will go on. b. Using the Diagram: Install the new Serpentine Belt on the remainder of the Pulleys....over, under, left right. c. Using a Serpentine Belt Tensioner Tool or Wrench ...

Question about 2002 Envoy

1 Answer

...Pulley that the belt will go on. b. Using the Diagram: Install the new Serpentine Belt on the remainder of the Pulleys....over, under, left right. c. Using a Serpentine Belt Tensioner Tool or Wrench ...

...ratchet to loosen tensioner. Remove belt. When installing new belt, flat side of belt rides on flat pulleys and the grooved part of belt rides on grooved pulleys. Install belt around all pulleys ...

ac clutch pulley and see any empty pulley grooves I would try running the belt in those grooves. According to my Gates book, the alt belt goes around the crank and fan pulley, and the ac belt does too

...way around a pulley the belt will be too long. Remember that with multi- groove pulleys the back of the belt goes around the idler pulley and the grooves go in the groves of the pulleys to be ...

...belt tensioner pulley 7.) Now move the belt tensioner position so that you can loop the belt over the alternator. 8.) Now double check to make sure that the belt is properly and securely fastened ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

2004 GMC Envoy
2004 GMC Envoy

2,225 Questions

2000 GMC Jimmy
2000 GMC Jimmy

1,363 Questions

2003 GMC Envoy
2003 GMC Envoy

1,368 Questions

2002 GMC Envoy
2002 GMC Envoy

1,418 Questions

1997 GMC Jimmy
1997 GMC Jimmy

1,123 Questions

Top GMC Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...