Questions & Answers for: Sony UP pos errors

sony up-dr 100 error 0007 error 0007 mecha trouble This may well be a failure of the cutter switch sensor to reset. This worked for me. Turn Off the Printer. Remove both side panels and the plastic ...

Error when printer is turned on When I turn my snap lab on it comes up then immediately go to an error message to reboot and if the error message still comes up the printer may be damaged. I have had ...

printer error When I turn my snap lab on it comes up then immediately go to an error message to reboot and if the error message still comes up the printer may be damaged. The printer is probably ...

Mecha Error 0005 When I turn my printer on everything is fine, until I go to print a photo on my Sony DR-100 thermal printer. When I go to print, it makes noises then comes up with a mecha 0005 error.

Sony UP-DR150 4x6 "ribbon error" When I load the 4x6 ribbon and close the machine it gives me a "ribbon error" and will not let me print. I opened up the package and used a new ribbon and it gave me ...

Error message Immediately gives the error message saying paper roll and/or ribbon are empty. Neither is the case. I actually have two of these doing the exact same thing Make sure you have put the ...

ink ribbon or paper roll error. the in ribbon is broken, or the paper roll is jammed. Clear the problem. I put new roll and ink cartridge in and still showing error Happend twice to me. What sometimes

...directly in front of the cutter helped me - in my case I received the error "mecha trouble cutter pos" problem was, the cable that runs the cutter had fallen off of the pulleys and after a bit of ...

mecha trouble problem cutter pos - in my case I received the error "mecha trouble cutter pos" I removed both side panels and the panel directly in front of the cutter this gave me access to the cutter

my sony up897md giving error ' door' error 'door', it will need repair probably a couple bad gears