...metal, is in the area where the starter engages with the engine. Recently I had startup problems but later found out that the problem was a faulty alternator. During this period repeated attemps at ...
...gear box, Modify a hook for that spring, you can either 1. Drill a hole in that plastic piece and hook that spring, or use some type of metal string to ties that spring in place. and i guarantee it ...
...gear, until car reaches 30mph. Then transmission can be changed to drive and will go fine, until car comes to a stop again, and cycle must be repeated. check to see if your shift cable, (depending on ...
...metal particles on the transmission pan could be an indication that there is a transmission mechanical failure and that the transmission will need to be rebuilt or replaced. my nissan versa sl have ...
gear box noise making a slight noise like somethin catching all gears ingaged fine maybe drain the oil and filter and replace with new. If it has a cooling radiator at the front, make sure thats not ...
Question about 2000 Sephia
...gear. At 65 mph, rpm is approx 4000. Changed filter and fluid, added slick 50, problem still exists. If it is a solenoid, how difficult is changing the solenoid? Alot of people have the same problem, ...
...gear oil in the tranny metal on metal ruins stuff real fast .usually 80 or 90 weight gear oil I personally run 80-90 gear oil but some manufacturers recommend 30 grade for their boxes ( straight ...
Usually answered in minutes!
646 Questions
464 Questions
311 Questions
187 Questions
127 Questions