Questions & Answers for: Kirby handle buttons

...G and I know this machine inside and out. First take the cord out of the clips on the back of the handle. Second at the bottom of the handle there is a grey rubber button that says "push" and you ...

...do you replace it? I have the replcement part. I assume you are talking about the release on the handle pivot. Unhook the bag so it is out of the way, take the hanle off, take the top cover off, ...

...set...the only one with little hooks that sit on the bar in front) You can change from the long handle to the short if you'd like also. You get the handles off by pushing the "seatbelt button" ...

...the brushes will now tighten the hose. The bag stays in the same place. If you have the 2nd handle attachment, you can use that to replace the upright handle. The release button on back side ...

kirby model gd3 Hi, I inherited a Kirby model gd3 Vacuum cleaner. It seems to work fine, but the handle will not stay up. It falls to the floor whenever you let go. I was thinking that I need a handle

...to clean the couches with it!!!! help!!!!! you can turn your Kirby into a handheld by removing the handle (button down on the bottom) if it came with all the attachments. Take the big handle off ...

...g4 to check if motor or switch is bad before you do all this, check the cord where it mounts to the handle up top by the pivoting strain relief. Frequently the cord goes bad right where it snaps in ...

how do you remove the handle of the g10d for shipping On the back of the machine at the base of the handle, there's a release button. Lift it up toward the handle and pull the handle up at the same ...

...must be replaced,( part # 558401S), as it has a gear pressed to it which has come loose. The handle, switch plate, and upper motor cover must be removed first. To remove the plastic switch ...

removing portable cleaner handle can't get handle to release To remove the long handle with cord attached, there is a press button at the bottom near the top of the vacuum body.. Mine is ...