Questions & Answers for: TurboChef general ir

Question about TORNADO Electric Oven

1 Answer

...look for corrosion or signs of arching. Is your wave cover damaged or missing. Sorry to say this generally is a factory trained fix because its usually because of an rf ...

Ad

turbochef toaster oven cc temp on warm up only 265 deg ir 465 when switching on the speed oven it goes into warm up mode , it displays cc temp and ir temp for 5 minutes it rises to approx 465 deg on ...

Ad

Question about TORNADO Electric Oven

1 Answer

f2 low temp i get this message f2 low temp on toaster oven The most common probem is burned wires going to the heater on the top of the oven cavity. Typically you will see the coating on the wire ...

Question about TORNADO Electric Oven

1 Answer

Our subway toaster is only heating up to 258 degrees and wont go any higher. We have tried resetting it at the back but this did not solve to problem. How can we fix this? Typically means the IR ...

Question about TORNADO Electric Oven

1 Answer

f8 heat low it goes up to 494 and stops there It generally is the IR Element that has gone bad. Look for burned wiring where the IR Element enters the oven cavity. Check for continuity through the IR ...

Question about TORNADO Electric Oven

1 Answer

I am working on an NGC subway oven and the store manager told me it would only heat up half way Check the IR element. check the heaters. check the high limit switch on the back of the oven. Usually ...

Question about TORNADO Electric Oven

1 Answer

My oven is on warming mode from last six hours. Please adivse First, check the back of the oven. See if the lil red button can be pressed in. Then check the IR Element, usually you can see the wires ...

high limit switch keeps triping on tornado oven and ir temp doesnt move ir elemnt was repaced as well the i/o board the K4/K5 relay tells the convection circuit AND the IR circuit to allow voltage to ...

turbochef tornado toaster wont get to menu, just warming up after I plug in the toaster, and turnit on, it says warming up. the IR and Temp both keep going up, and then it will peak out, and never ...

Question about TORNADO Electric Oven

1 Answer

F8 code; IR element will not heat up F8 code appears on screen. In test mode, i am getting convection heat but the ir element will not heat up. is this definatey a bad ir element or could it also be ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top TurboChef Oven Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

vince

Level 3 Expert

2530 Answers

Are you a TurboChef Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...