...fuse that has failed. There aren't many things that a dedicated DIYer can't do given time, a few common tools and some common sense. Having a multimeter at home helps too; these can be had at ...
...problem. It's a little black fuse that's next to the thermal fuse on the duct housing. It's pretty easy to fix. You need to take the bottom pannel off and then the black blower housing. Good luck
...pannel is a ceramic fuse looks like a car glass type fuse. To replace it you must remove the outer shell. First unplug the device,2nd place on a flat work area,3rd remove the screws from the back of ...
...fuse I need to check, and if there is where is it located I took the top back pannel off and did not see it up there??? It could be several other things thermal fuse, thermal cut out, hi limit ...
...or fuse, or thermo fuse Most likely problem is the switching back of the controll pannel. Take the cover off of the controll pannel and look for burn mareks in the fiber that holds the
pannel will work I've had that happen before. The lightning blows out an electronic component on a circuit boart for the panel of if lucky maybe a fuse or breaker. Try to look at a manual on sears
Question about 13742 / 13744 / 13749 Built-in Dishwasher
...pannel is not working right. Some of the wash cycle lights will come on when depressed but the "wash" button does not work and cancel and drain is the only thing that works see the diagram ...
Usually answered in minutes!
1,329 Questions
1,410 Questions
750 Questions
524 Questions
182 Questions