Questions & Answers for: Nissan Sentra fuel rail

...fuel rail and sparks at the spark plugs. The engine turns over but doesn't even want to try and start. When you say there is fuel at the fuel rail have you checked with a pressure gauge? Or did you ...

...fuel rail. 2) My vehicle is a standard, so it will not start without pushing the clutch in. If I try to crank the engine without holding the clutch, the fuel pump *should* activate. However when I ...

...fuel rail. The fuel pressure regulator will be on the fuel rail. This is a long rail that connects to each fuel injector. On the sentra, the fuel rail will be behind the valve cover on top of the ...

...fuel rail down to the filter. it will be under the vehice, probably have a plastic cover over it,be care ful ther will be alot of feuel presure in the line, you can fifst look on the feul rail ther ...

...fuel injection rail. it sounds like the diaframe inside is not operating properly. You will need to put a fuel gauge on the fuel feed, which is coming out of the fuel filter on the fire wall right ...

...fuel rail residual pressure test.probably defect w/pressure regulator /check valve in fuel tank.fuel rail does not hold residual pressure so when you start after sitting for extended periods it takes ...

...the proper amount of fuel to the injectors. If you know how you can connect a fuel pressure gadge to the fuel rail. if it gets lower than 35 its bad. also the fuel rail pressure switch could be ...

...fuel-rail,fuel-lines,ecm and all sensors that ecm will read. work was done at dealership. car still acts like its not getting enough fuel. I have to ask, did anybody actually check the fuel pressure ...

...fuel rail? is there a testing tool? A fuel pressure gauge will do it. Should pressure up and hold 40 psi or so ,make sure to check the pressure regulator also,just pull the vacuum like off and see if ...

...fuel rail with a socket wrench and disconnect the fuel injector electrical connectors. Remove the fuel rail mounting bolts with a socket wrench so you can separate the fuel rail assembly from the ...