Questions & Answers for: Volkswagen engine timming

...2006 vw jetta with a 1.9l diesel engine i need help with the timming belt tensoiner instalition. rotate the tensoiner clockwise untill the arrow in the ten is lined up with the slot cut out of the ...

get rained on) but I need to get it all the way inside. BTW- There must be a more logical method of engineering so you don't have to take half of your car apart, and put back together, just to REPLACE

engine running on and no the ignition timming is out i have a timming light and just wanted to no what degree it should be set to its a 1800 mk1 golf cabriolet 6 Degrees Before top dead center *Set at

...engine, nothing firing, changed fuel pump relay, ignition switch, checked fuel line at fuel rail. what do i need to do? check timming belt and it it is not turning this is your problem and if so this ...

1991 mk2 golf gti engine running on and no the ignition timming is out i have a timming light and just wanted to no what degree it should be set to its a 1.8 16v 6/950

...engine temp sensors//checked timming ///cannot smell fuel on the plugs after trying to crank engine Sounds like the fuel filter. It would indicate the correct pressure at idle or maybe even revving. ...

It sounds like exhaust is blowing but from the front of the engine only when cold start is on but exhaust is at the back of the engine You may have a hole or part of your manifold gasket is gone. Just

...timming belt or chain? This year uses a timing belt and it should be replaced every 60,000 miles, this is very important to have the belt replaced at the recommended mileage, the engine is not free ...

...engine? depends i would get a new timming chain fitted first and the try starting it before getting a new engine also depends on how much it has sliped if only 1 or 2 teeth should only be running ...

setting the timing on a vw 1.8 Which engine? there are a few various types all different. Also some engine are self timmed. There are several options with cam timing too. If you need you can go on to ...