...i replaced cap button wires plugs it has a 2.4 truck ran but sounded like it was bogging checked egr back tracked all parts installed all parts put on not helping problem macking it worse sounds ...
Problem with Egr Valve Hi, Im try to fix my problem but I dont finded. The problem begin at 1,100 rpm and progress the throttle, the egr valve open and close and produce engine lose power, but sound ...
me. After revving the engine, once again it seemed to cure itself. What it turned out to be was the EGR valve sticking open with the engine under load and causing the engine to act as if it had a huge
PU runs fine until it reaches normal operating temp then it starts missing. New plugs and wires and new dist but still having problems check E.G.R. valve to see if its sticking.
...light came on due to codes P0400 and P0136. After troubleshooting i found a broke hose on the EGR which i replaced. I cleared the codes expecting the light to return with a P0136. I've driven ...
...jerking. Then i have to drop the speed to 50 km or to the speed where the car runs smooth. An EGR valve can cause these problems, i had same exact problem, so replaced the egr and problems were
...NOx oxides of nitrogen. The standard is 3.00 mine was 3.26, what could be the problem, is it the EGR valve? NOX is formed from high pressure and temperature above 2500 degrees. The job of the egr ...
low gas milege on 94 nissan 4x4 AFTER A COMPLETE, TUNE UP, A CLOGGED EGR VALVE, O2 SENSOR, OR BLOCKED CATALYTIC CONVERTER, CRACKED VACCUME LINES, COULD BE THE PROBLEM.......GET IT ...
...Nissan pickup The check engine light has been reset numerous times. We recently changed out the EGR valve and replaced the hose also. How can we get this light to stay off. We even tried driving ...
WHAT DOES THIS CODE MEAN 1401 FOR MY 1997 NISSAN 4X4 TRUCK? problems in the EGR system /EVAP system/EGRT sensor.
Usually answered in minutes!
829 Questions
564 Questions
428 Questions
367 Questions
319 Questions