Questions & Answers for: Honeywell dizzy head

tool to open the heater Can you tell me what tool is required to drive the screw out of the casing. Looks like it is a special tool. Please advise if it is available in the market. Thanks a lot. Lito ...

Central heating Should a thermostatic radiator valve turned to 0 setting stop water coming through the radiator? or put it on frost setting if you can take head off spray with a little wd40 around ...

Cleaning a HOneywell 14F0 fan I can't find the screws, etc., on the back of the fan that you describe. On the base, yes, but not the back. Norm I have this fan & have removed those screws.   ...

ideal boiler no heat to radiators but hot water still working check the divertor head and valve. sounds like it ist adjusing from dhw to ch. take head off(remove pi at back,or side pin) and push pin ...

head light. It permeated the entire room quickly and caused the students to feel faint and dizzy. What caused this and is the odor itself dangerous? I would probably not blame the lights, but probably

replace honeywell V8034F1051 zone valve I want to replace honeywell V8043F1051 zone valve that controls hot water. I do not want to replace the whole valve with plumbing and all involved or replace ...

hi, i have a system 2000 with honeywell zone valves , about (10 yrs old) one zone is not getting heat, the power head opens, but very little heat goes thru the valve. the burner will shut off, but the

the inside of the unit is dusty and the screws holding it together are not able to be removed with standard phillips head . how can it be cleaned? You need a star head screw driver to take this apart.

how to take a honeywell radiator off the wall Turn off the circuit breaker to the AC and heating unit. The circuit breaker is inside the home electrical box. The door of your electrical box has a ...

hy108tgt how do I remove grille and filter to clean Our HY-108 (not a HY-108TGT) does not have a filter when it was purchased new from a Retailer. IMHO, Honeywell/KAZ designed these Tower Fans to be ...