decompresion problem adjust exhaust valves. Check the decompression valve on the front top side of the motor to see if it working or unpluged
...Will not start most of the time. I have replaced the battery, pulled and checked the Starter Relay, Decompression Relay and the combination Turn Signal/side stand Relay, I have also tested the ...
...depending on how long you have had it, it may be time to replace it. on the1400 intruders the decompression cable running to the rear cylinder will stretch over time and use. On the front ...
...you are referencing is the VL1500LC Intruder if this is the case then you may need to adjust the decompression cable between the cylinders. This is common on this bike as the cable will stretch
...tried to kick bike over but cannot get the bike to kick . What might be the issue? Is there a decompression button or something? Has it got new rings and is there any
Question about 2000 VL 1500 Intruder LC
2000 suzuki intruder 1500cc. With both decompression cables released, the front decompression lever feels like it is against something when I turn it by hand. The rear decompression lever turns much ...
...my daily driver until it died on me in the middle of the road. We replaced the battery, starter, decompression solenoid, the main spark plug, and the spark plug connector.. we don't know what else ...
Question about 2000 VL 1500 Intruder LC
1998 Suzuki VL1500 front decompression shaft binds when the retaining bolt is installed. Needed to inspect the tip of the decompression shaft. Removed the retainer bolt completely with no problem. ...
Usually answered in minutes!
329 Questions
228 Questions
165 Questions
158 Questions
169 Questions