Questions & Answers for: BMW 323 no ci module

replacing belts on 2000 323 ci. Do I have to remove the radiator to replace the belts? u can remove the belts from tentioners under the front of the car

...ci Why does my bmw not restart easily after it has been driven once - i can go 1 mile or 200 miles once stopped (like for petrol) i go to start the car and it wont start without a lot of persuading ...

Vents continue to blow air after vehicle turned off and they dont stop I have a 2000 BMW 323 ci and the vents continue to blow air after the car has been turned off and continue to do it at all times.

my '99 323 ci's air blower fan became loud so I turned the fan off. It won't go back on. Replace resistor pack. a four prong thing. Google: resistor pack 3 series e36. When they go bad the

My battery light on my 2000 323 ci goes out after having the the rpms above 3000 rmps Hi could be a fault with the charging system Alternator.

...when coming to a stop revs up to 1500 rpm back down to 1000rpm then cuts out its a bmw 323 series 3 ci se check your vacuum hoses and also check your intake tube, my 325 i did same and found out was ...

I have a 1999 323 convertible. The top goes down to the point where the top has to go forward to allow the lid to open. It sticks before it can go far enough forward. I have to manually push it out of

bmw98 e36 P1423 loosing acceleration start with the common things. You will be surprised with how clogged air filters can alter the peformance of your vehicle. I would start by checking air filters. ...

The emergency flashers won't turn off. The problem, I suspect, will be with the switch unit for the Hazard lights which will need to be replaced. In the meantime check your fuses. In some vehicles ...

Does this vechicle have a cut off switch She is turning over but not starting she normally starts straight away Cut off for what the fuel pump?? If so the answer is not it doesn't and if it did it ...