Questions & Answers for: Philips channel life

...channel reappears and dvd player goes back on standby, the standby button flickers when this is happening so must be some power there. have changed the fuse and the batteries also unplugged all but ...

There is a service menu with settings to adjust things like convergence and vertical and tunning of channels, ect ect. Get a manual and follow it if you want to try a "code". you can get one at http:/

...channel. The TV worked fine when we went to bed. In the morning it turned on with a black screen and had sound. We have checked all the cable connections (We have cable fine on our other TV). We have ...

...channel. 5) Press and release the OK button to install the code I have the same remote and couldn't find the manual. I found it online. Here you go! :) ...

...life it needs technical service. There are about 10 sections that would need to be checked to see where the overload conditions are causing the problem. As a general rule this type of failure is ...

...life adjusting the antenna and never moving when watching the tv, then you might pick up a channel or two. You need a outdoor antenna. I have two Magnavox boxes hooked up to the antenna. They work ...

...If on the other hand the dead channel comes to life when you swap the jacks around, then it's is the deck. The most obvious fault being the cartridge. But some decks also have a pre-amp in

My TV has sound and all the channels work but no picture is displayed on the screen. I have a 42" PHILIPS LCD TV. What is the normal life span of this TV and is it still under warnnty after two ...

...channel and do not turn it off before the recording time. If you are doing a timed record, set the source after setting the time with the up/down/right/left arrows and then press the right arrow to ...

all well, I am looking to download this Philips life view software, it is used to tune TV and radio channels, I already have the drivers installed but I need the software, I hope you can help me, they