...CH 01. It won't power up with the power switch. If I unplug the unit and plug it back in, the fan starts to rune then it shuts down and displays the fault Code. All the switches seem to be working ...
Question about BHD-501 Dehumidifier
...switch said there was another problem, not the switch. I feel the switch might be erratic. Thanks for your help. If you get a fault code CH 01, check the posting for that solution and see if it
CH 01 Error Code "CH 01" what does it mean? I have a Comfortaire BHD501 dehumidifier. A couple weeks ago I noticed ice building up on top of the unit,so I unplugged it to defrost. I plugged it back in
unit only runs a few seconds and then shuts off screen reads ch 01,bucket full light blinking If the water reservior is empty then the float is stuck in the full position.
CH 01 is showing where the humidity level is suppose to be. The machine turns on & shuts off immediately Had same problem in 2008. Had to replace Evap Thermister board and sensor. Parts $120 Labor
...CH 01 Had same erroe code in 2008. CH 01. Bucket Full light was flashing, but it was empty. Would not start. Called customer service and was advised it was most likely a compresser problem. In that ...
...CH 01 shows on display Hi, Here is a tip that explains what can be happening to make the dehumidifier showthat the bucket is full when it is not. Dehumidifier Problem It shows Bucket Full ...
CH 01 code is on panel, and "bucket full" light is flashing. The bucket is not full, and dehumidifier will not run. We cleaned the filter and coils, which did nothing. Hi, Here is a tip that
Usually answered in minutes!
58 Questions
50 Questions
24 Questions
14 Questions
0 Questions