Questions & Answers for: Simplicity carpet

...stop. The bag was pretty full but not overly so. It's a Simplicity canister with power head. The carpet is long shag from the 70's Did it just over heat? Thanks Shauna It normally won't over heat ...

...is installed properly. If it is not seated well the brush roll may not be engaging fully with the carpet. Make sure the wheels on the bottom plate work

beater bar does not work when on carpet. slightyl lift up and it starts moving. Replace your belt. Find your belt here If you need anything contact me Tim TheVacCenter.com

...for power head turns on very slow and droning sounding. Any ideas? I did vacuum up some Borax from carpet last week. Maybe a clog somewhere? Any idea where I should start looking/cleaning? sometimes ...

my simplicity 7200 does not have vacuum. Air comes out the front post filter area If air is coming out of the filter air has to be going in through the suction hose but it may be restricted with a ...

...clutch on the brush roller may be worn and not engaging or the wire lever from the slide switch for carpet and tools may have come off the clutch mechanism and won't let you engage the clutch when ...

...have a simplicity freedom Model S10E we cleaned out the hose and now it will not self adjust to my carpets. I have one carpet that is higher and its hard to push and I have a rubber smell The rubber ...

...much suction but may still seem to be vacuuming properly because the brush roll is agitating the carpet. Depending on which model you have if there is no suction at the hose end there is likely ...