car bucks when gas pedal in pushed i have replaced my spark plugs, coil pack, throttle postioning sensor and fuel filter as a result of trying to fix the problem check for a vaccum line off or a ...
...and put it on today but now it just wont fire. Im pretty sure thats its in time cuz I aligned the cam and the crank in the 12 o'clock postions. What did I do wrong?? Please tell me. Take the plug ...
...of money into it. I am not that mechanically inclined so I hope it is pretty simple. PLEASE HELP !! cam postion sensor would be located at eather end of the cam. also crank postion sensor could be ...
i got the code P1383 . i would like to know if that is the sensor for the cam or if the timing has jumped . That code is for the cam. Cam position sensor over advanced on bank 1.
...cam sensor for on a 1993 ford escort... What is the cam sensor for on a 1993 ford escort The cam sensor is a magnetic pick up coil that sends a reference signal to fire the fuel injectors. It is ...
cam postion sencor might be bad? Replace not it! now was told my autozone guy might be crank sencor? But need a pix or something i can't find it? your help is needed! Thank you Darren well i dont know
the car start and rev up and stop TPS THROTTLE POSTION SENSOR IT SIGNAL THE RITE AMOUNT GAS TO BE ACCELERATED TO THE THROTTLE BODY
...cam shaft sensor..its located on front side of engine. this fixed the same problem i had..there are 2 sensors one being your cam shaft sensor (normal to go out) and the crank shaft sensor..these work ...
...sensor and the code came up again. I need to know if theres something wrong,or something that I've missed or have forgottten You don't change any parts when a check light comes onYou use ...
postion sensor the only way i would do it is get one from the junkyard that is on a vehicle that is not damaged in the front. if that one works ok. is the computer code indicating this is what's wrong
Usually answered in minutes!
2,142 Questions
1,335 Questions
1,118 Questions
957 Questions
841 Questions