switch? Can I replace it myself? try some DW40 first. yes! you can change it yourself. you need to drop the stearing colum, drill out the breakaway screws, reinstall the key cylinder, lock and wiring.
...ON THE MAINT. REQ LIGHT BLINKS THEN STAYS ON THE WHOLE TIME THE CAR IS ON and as soon as i hit the breaks the first time i start the car the brake lamp stay on The Maint Req Light is only a reminder ...
...break pedal arm). The switch will have voltage on one wire....when the pedal is pressed, the switch closes the circuit and sends voltage to the other wire connected to the brake lights. check the ...
...then carefully detach the hose from the fitting. If the hose is stuck, carefully use a pick to break the seal between the radiator hose and the housing. If the hose is deteriorated, replace it ...
...break dont work but my regular lights do i cant figure it out i changed the bulbs and checked the fueses i cant find the problem does anyone know what might be the problem brake light switch Brake ...
...break in and the key less won't open the drivers side door but you can open with the key manually after that and I tried to reprogram the remote with the instructions given of 1 to 4 seconds and ...
Usually answered in minutes!
424 Questions
415 Questions
325 Questions
357 Questions
278 Questions