Questions & Answers for: Suzuki VL 1500 Intruder LC brake

Question about 2002 VL 1500 Intruder LC

4 Answers

brake failure rear brake failure vl 1500, this has happened on a three occassions over say 4000ks,first noticed on step decline when rear brake applied pedal goes to the floor (so to speak) not spongy

Ad

Question about 2001 VL 1500 Intruder LC

1 Answer

how do I change the back brake caliber? one side of my back brakes pads is still like new, while the other pad is metal to metal. I've been told that my caliber needs to be changed. I've took both ...

Ad

Back Rotor & brake replacement for 1500cc intruder have Question Rear Rotor has grooves big time and eating up my brake pads on the rear. Also my front brakes squeeks or makes noise when i stopped

Question about 2001 VL 1500 Intruder LC

1 Answer

what is the torque setting for the front brake what is the torque setting for the front brake disc on a 2001 vl 1500? According the my manual it says to tighten them to 17 ft/lbs. But be aware. They ...

Question about 2001 VL 1500 Intruder LC

1 Answer

could you please tell me? Hi and welcome to the site, The clutch uses the same type of fluid, DOT 4 brake fluid, as used in the brakes. Good luck and thank you for asking

Question about 2001 VL 1500 Intruder LC

1 Answer

...master cylinder cover and take an old, clean, lint free, cotton sock and gently soak up all the old brake fluid in the master reservoir. Place the sock into a used zip lock bag and discard. DO NOT ...

Question about 2000 VL 1500 Intruder LC

1 Answer

my tail/brake light is not working on my 1999 intruder. They were working fine last week but not now. when I turn the key to the rear "P" position, the brake light only works, not the tail ...

Question about 2001 VL 1500 Intruder LC

1 Answer

i need to know how to tell if my rear brakes need to be replaced on my 2001 suzuki 800 intruder if you can see the pads check if they look thicker then a dime, if they get down to that thin then ...

2003 Suzuki VL 1500 Intruder LC REAR DISC RATTLE,HOW DO I REPLACE IT? THE REAR BRAKE DISC HAS 8 VIBRATION BUSHINGS THAT ARE LOUSE. Hello Dale, this is an easy job on your bike. Use a flat head screw ...

Question about 2000 VL 1500 Intruder LC

0 Answer

How do i bleed the brakes? Hi, Richard for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Suzuki, despair not, for a mere $0 ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...