Questions & Answers for: Jeep Wrangler blower motor just stopped working

Question about 2001 Wrangler

1 Answer

...stay on for a long time then stop working and it would come on again after a while. Now it comes on for a few seconds and shuts off. Please help. Thanks Do you mean the blower motor? Check

Ad

Question about 1999 Wrangler

2 Answers

...blower motor resister has burnt out also check wiring going to your blower motor resistor these must have a good tight connection or they will burn if any sighns of being hot change the complete ...

Ad

not work at all. Do I need a new fan motor? The fuse is not blown. Any ideas? Thank You! Blower motor resister is bad, Thats what makes the blower run and also regulates the speeds of the blower motor

blower motor? If you bypass the resistor pack and connect the motor directly to the fused 12v supply then the fan should run at maximum speed. If so, it's the resistor pack that's blown: a very common

...blower motor. Several months ago, position 3 for fan speed stopped working. If I played with the switch, I could get it to come on, but that only worked for awhile. Oh well, positions 1, 2, and 4 ...

...under the dash that I'm not seeing? what else could caused the other speeds to stop working? Blower resistor is bad . Do you know what that is ? Jeep Cherokee Blower Motor Resistor ...

...blower motor resistor and possibly the wiring harness. This is a common problem on Chrysler vehicles. It gets hot and melts the connectors. It is located on the passenger side under the dash next to ...

Question about 2008 Wrangler Sahara

1 Answer

BLOWER MOTOR NOT WORKING I have a 2008 jku and the blower motor stop working when I went to start the jeep the next morning. It did not work on any speeds. I pulled the blower and hooked it up to the ...

Question about 2006 Wrangler

1 Answer

...be? it worked for a whole week now nothing I'm not following your story. Does the blower motor stop working from time to time ? Have you checked the motor for power and ground when it is not working

blower motor is 90% the resistor is bad, 9% the blower, 1% the control module. Replace the resistor. The wiper is the wiper motor. It has all the controls built into it. Very rarely does the switch on

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...