Questions & Answers for: Acer Aspire beko tv set

...graphics properties and then the output option should be able to be set and the resolution changed if needed, set your tv for AV3 or s video and connect a seperate audio cable as s video is video ...

tv with vga cable? yes you can. remember you have to set your PC display settings and select the input in your TV. Audio must be transferred via separate cable. Let me know if you know where to config

...make sure the TV is selected and active as secondary display. Verify that you get a picture on the TV when doing this, if you do - you're all set. Restart the computer and the problem should be

I have an HDMI Cable how do I connect my computer to my Plasma TV Your laptop has to have an HDMI output and the tv has to have an HDMI input. Put the tv on that HDMI source inpput, the laptop will ...

...a picture. Once you have a picture on your TV you can then set it to the native resolution of your TV. i.e. 720p will be 1280 x 720 or 1368 x 768. 1080p will be 1920 x 1080. Don;'t forget to rate

tv stopped showing my pc screen through hdmi cord I have a brand new dell laptop that i usually hook up to my tv through a hdmi cord. today i hooked it up and the tv scenced an input but says there is

...TV's, Desktop. You need to set either a "Cloned" display or "Spanned, Extended Desktop". Go to "Display Settings" Now ensure the TV/Monitor connected has the correct input/output display settings. ...

TV source or input needs to be set to "PC". Once that is done turn the netbook OFF, then plug the VGA cable into the netbook and start the computer. The computer screen should automatically show up on

beko 32" flatscreen and everytime i plug the vga lead in the laptop screen goes black an the tv says no signal,,what am i doing wrong?? It could be a no. of things: - Wrong input selected via the

...set to something higher than the maximum allowed by the TV. To change the settings you can click click the desktop>Properties>Settings ...