Questions & Answers for: Volkswagen Jetta auto mate remote start working

...fault but fresh connection and new wire cured it? so try checking relay socket/wires? it was an auto sparks mate that gave me the info and said common occurance on jettas back then hope this helps

...Remote seems to work fine for the locks as well. All other doors are working as normal. Any help would be much appreciated. Sounds like the plastic clip on the lock/handle broke/fell off;) ...

...working 100%. If I activate the remote, everything opens, except the trunk lock. All the fuses are in order and if you disconnect the trunk lock motor from the car wiring system and connect the ...

...remote these are the factory instructions. 1. Switch ignition on with a key (don?t start the engine!); leave key in the ignition. 2. Mechanically lock vehicle at left front door, using second key. 3. ...

...start it again, it does nothing. Does not click or try to turnover at all. Is it possibly the remote key. My daughter has the remote key so we haven't tried that. it could be that he locked the car ...

...start my card i went to click the remote alarm and it doesnt work what i need to do Have the same problem, remote entry, moonroof, power windows don't work. Visually checked fuses but will have to ...

Car may have been hit by lightning I have a 97 VW Jetta GLS...when i came out to the car the next morning of a thunderstorm, the dome light was on (the light was off before i exited the car the night ...

...auto lock when the rest of the door do - but wont. try using the remote unlock - then press the remote lock. This works on my 2000 jetta tdi. VW dealership told me $450 job to change door latch and ...

...of the chain auto parts stores will check it for load capacity for you free of charge. 2000 tdi have no power to start stop solinoid but if i jumpit it starts does the coolant temp sensor control ...

...where i would add it G'day mate i think you will find that a lot of modern vehicle such as yours have no dip-stick for the auto and if a problem arrises need to be taken to a mechanical repiar ...