Questions & Answers for: Admiral agitator loose

...loose agitator, remove the cap in the centre of the spindle where you put your conditioner by pulling, inside deep down you will see a 17mm bolt, tighten using a socket and long extension, you should ...

loose agitator, try lifting the agitator, if it lifts then it is un secure, remove the softener cap and down inside the agitator you will see the fixing bolt, You will need to lift out the agitator to

loose. Sometimes in spin cycle drum is way out of center not spinning in tight circle. today smelled burning rubber smell. could it be drum "hold down springs?" If you mean the inner drum - remove the

is my washer screwed? I moved the washer to get behind the dryer, when i moved it back and started a load it made a loud clicking kinda rough noise and doesn't spin. could i have shook the barrel ...

...agitator comes loose on these machines inside the drum, to secure this, remove the softener cap in the centre of the drum by pulling, look inside and secure the bolt deep inside, you will need a ...

auger pops off the plastic auger pop off and i pushed it back down buy it keeps popping off what can i do Tighten agitator retaining mechanism. Loose agitator causes cap to fly off.

Started with a loud grinding noise when the machine agitated and was in the spin cycle. Now it will not move at all. Mine just started the same thing. the pulley on the water pump has a press-fit ...

when agitates sound like something loose. Look down to the bottom of the agitator and there is a bolt. Check and see if that bolt is loose.

My Admiral Designer series washer (came with my home unkn age) stopped agitating My washer won't agitate (you can hear it clicking) but it will drain and spin. The part that the lid tab goes ...

I have an Admiral ATW4675YQ1,that is making a grinding noise, while in wash cycle, for several seconds, then all lights go out, including lid, all the while it is making the noise until I unplug it. I