Questions & Answers for: Toyota 4Runner d 40 won t flash

Question about 1992 4Runner

1 Answer

...how is the fuse labeled? The AC system utilizes 4 fuses. They are: a 10 amp AC, a 10 amp GAUGE, a 40 amp HEATER and a 30 amp CDS FAN The 40 and the 30 will be found under the hood, in the fuse box, ...

Ad

Question about 1995 4Runner

1 Answer

A/C quits after about 30 to 40 minutes of runtime on my 1995 Toyota 4Runner A/T 4WD Limited. Will run okay again after it's turned off for about 30 to 40 minutes, even on the highway. There is no ...

Ad

how to finally kill flashing tire warning light on 4runner sports v6 model 2005 despite 40psi pressure gauge on all 5 tires is 40 psi the recomended tire pressure on the drivers door jamb? also most ...

Question about 2000 4Runner

1 Answer

... 2. Insert the key into the ignition (don't turn it) and pull it out. 3. Perform these steps within 40 seconds: a. Cycle the power locks 5 times. Use an even pace and try to go relatively fast. b. ...

Question about 1989 4Runner

1 Answer

...know what oil i can use in my 1989 toyota surf its a turbo diesel the manual says to use a sae 20w/40 cd or better but when i went to buy oil they sold me a 15w -40 api ch-4 is this ok or do i need ...

Question about 2003 4Runner

1 Answer

Half of my multi-information display won't light up and the center set of a/c buttons won't light up either. How would I go about fixing this? Thanks! Those are LED lights that can be replaced

Question about 1998 4Runner

1 Answer

I have a 1998 Toyota 4runner that won't start. I usedto prime it with starting fluid and it would run. Then it got where it started popping and the code read random misfire and fuel too lean, so I

1999 toyota 4runner radio works but cd player won't read cd my radio works, but when I put a cd in the cd player, it will kick it back out, won't read cd I am having the same issue! How did ...

my 4 runner starts sometimes and won't other times, it justs cranks over but won't run my 4 runner starts sometimes and won't other times, it justs cranks over but won't run As

won,t work forgot to remove ground cable,the wiring digrapam don,t show color code Sounds like you may have fried a fuseable link The explanation makes it sound hard . It is trickey at best . 3 of use

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...