Questions & Answers for: GMC 1999 starter

Question about 1999 Jimmy

1 Answer

1999 Jimmy Starter My starter just makes a click sound when I turn the key. I repalced the starter and check the grounds from the battery to the body and frame. Also when i try to start it a couple of

Ad

1999 suburban starter replaced battery good turns over eratic I have a 1999 chevy suburban with a 5.7 L I replaced the starter and know the battery is good however the engine turns over very slow and ...

Ad

...starter on a 1999 Chevy P10 Step Van Remove the negative cable from the battery. Remove wires off of starter. Remove 2 starter bolts. Reuse shims that may be installed. Replace the starter in reverse ...

...1999 gmc starter because wires are hard to get to. 2.2L Engine remove protective shields as needed then remove front exhaust pipe. Remove the brace from the engine to the clutch housing, then ...

Question about 1999 Suburban

1 Answer

Starter for a 1999 GMC Surburban my rebuilt starter has 3 screws with nuts and the old starter has only 2 so which 2 do i use Get the correct starter first off. If your new one has 3 holes, and the ...

...1999 gmc safari if just the starter fusible link is burned then you should have power to and from the switch, and also power before but not after the fusible link itself. if this is the case you may ...

...starter twice in my 1999 Yukon and it starts up 2 to 5 times then I just get a click and the starter won't turn over no more even when I take it out of vehicle. I have 77K and just replaced the ...

Question about 1999 Jimmy

1 Answer

...starter casing. It was running fine and without any warning it started breaking starters..I have never heard of this and none of the mechanics I talked to have either. Please help. 1999 GMC Suburban ...

starter on a 1999 gmc yukon As a last resort...trace the positive side cable from your battery...this connects to the starter...you will need to be under your Yukon to see the connection...the starter

...TIME DOES IT TAKE TO CHANGE A STARTER IN A 1999 GMC YUKON DENALI? HOW LONG DOES IT TAKE TO CHANGE THE STARTER? The do it yourself time for this job is rated at 2.1 hours, 1.5 in the shop on a

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

2004 GMC Envoy
2004 GMC Envoy

2,225 Questions

2000 GMC Jimmy
2000 GMC Jimmy

1,363 Questions

2003 GMC Envoy
2003 GMC Envoy

1,368 Questions

2002 GMC Envoy
2002 GMC Envoy

1,418 Questions

1997 GMC Jimmy
1997 GMC Jimmy

1,123 Questions

Top GMC Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...