Questions & Answers for: Chevrolet C1500 1996 k1500

1996 chevy k1500 truck. I tried to put it in 4hi and it did not ingage. I tried 4low and it did not ingage. I have a stick 4x4. what is causing my 4x4 not to work? I didnt think the transmission would

1996 chevy k1500 ignition advance -23 I have a 1996 chevy k1500 with a problem, the ignition advance is reading -20 to -23 when it should be just 20 to 23. I got the truck 3 years ago and always had ...

...1996 K1500 vortec engine seized up last week, used to drive it everyday. Took off the heads and found small crack on cilynder 5. Used marvel mistery oil let it sit for a couple of days and still ...

1996 chevy 1500 series z71. The noise is not constant and has not been duplicated in 4 high or low. The transfer case grinds when shifted from neutral to 2 high. In addition, there is a grinding noise

...1996 chevy k1500 fuel pump would loose its prime overnite. I replaced the pump and am getting fuel all the way to the throttle body but truck wont start. if i add fuel directrly in throttle body will ...

1996 chevrolet K1500 brake light switch I replaced the brake booster and reinstalled the brake light switch. I do not understand how it could possibly actuate the switch since it floats on the booster

99 chevy k1500 I have water coming in under dash onto floor 99 chevy k1500 I have water coming in from under the dash onto the floor. Any suggestions? heater core,,have ur coolant system pressurize,,

1996 chevy k1500 truch vortex v8 5.0 The M.A.P. sensor is located on the upper intake manifold plenum. It has a plug with 3 wires connected to it, and a vacuum hose connected to it. to chek the sensor

96 Chevy k1500....with 350 in it. Change fuel pump an relay an still don't start Hear the pump run for 3 seconds when you turn the key on?if so,not the pump.Even have somebody listen at fuel neck,