...125 losing power Hello, I've Just got a Kawasaki KMX 125 (B11) its great but feeling really rough when the KIPS System kicks in at 6500rpm! its coughing & spluttering really bad & loses nearly all ...
...125 (B11). I've just had a 0.5mm Re-bore, Nicosil plate, Over sized piston-rings Etc... (Due to seizure because some Muppet didn't Aline the piston rings correctly!) The bike has been run-in and it ...
125 for the road i recently removed the washer from the exhaust and have since started to notice a small stutter /flatspot at around the 7k-9k rev range i can ride through the power drop sometimes but
engine looses power after a while runs fine then when at full power suddenly looses power ,slows then pick up again try changing plug to a br8eg and get back to me if no good
...125 turning it in to a filed bike as the twin power values would give me that boost and now its in an allly frame the wigths just in the eninge but the promblem is wireing i have the loom but dont ...
...125 clutch springs!! You can play an adjustment with your spring,the best adjustment is when your bike does't have a running cluth situation, and once you press the cluth lever and release it you'll ...
...125 2005, recently it's not been running like it should in the power band, seem starved of air thats what it feels like but I've cleaned the carb even cleaned the valves and rebuilt the top ...
...125 which i love! But the only this is that when i full throttle the bike. It over revs after 6-7 thousand ( not powerband lol) and looses power. Now i thought this was the clutch so i go a new one. ...
...125 it was fine one day then it wouldn't rev up was running poorly and wouldn't go faster than 12mph I checked reeds and cleaned the carb then it worked fine for 2 days then done exactly the same ...
...2000 KX125 How to install KIPS on Kawasaki KX 125 Power Valves Kawasaki KMX 125 1986 2002 Service Repair Workshop Manual 1987 1988 1989... $22 OEM Parts for Kawasaki ...
Usually answered in minutes!
46 Questions
37 Questions
