Problem with DV output on ag-dvc30

My Panasonic AG-DVC30 has everything installed and battery fully charged along with the DV tape installed I press record and it tells me "dv external disconnect" what gives? what good is the battery then? can you clarify?

This is usually caused by an oxidized, misaligned or defective Audio/Video drum. You can try running a cleaning tape through the camera. If this does not solve the problem the camera will need to be serviced by a qualified service technician.

My name is Rick and I'm a professional repair technician with over 20 years in the business and have repaired many of these. I'm semi retired and work from home with little overhead so I can keep repair cost low. If you decide to have the camera repaired, please click HERE for a directory listing that suits your needs.

If this response has been of any help to you, please be sure and give a positive vote for me on FixYa.com .

This is usually caused by an oxidized or defective Audio/Video drum. You can try running a cleaning tape through the camera. If this does not solve the problem the camera will need to be serviced by a qualified service technician.

My name is Rick and I'm a professional repair technician with over 20 years in the business and have repaired many of these. I'm semi retired and work from home with little overhead so I can keep repair costs low. If you decide to have the camera repaired, please click HERE for a directory listing that suits your needs.

If this response has been of any help to you, please be sure and give a positive vote for me on FixYa.com .

thats probly the cass in swicth
or a dirty sensor....
hope that will help..

try an older version of pinnacle studio or another pc if still no capture, firewire camera board failed.

sounds like the threading mechanism isn't able to completely thread the tape. there may be something obstructing the travel of one of the threading arms that pulls the tape around the head.

XLR cables only carry one channel. There is an option in your camera to split into two channels - enable it, or split into two channels in post. To record left and right from the DVX using XLR cables, you'll need one for left, and one for right.

Good luck.

I think it's possible if you change a setting on your camcorder.  Turn your camera on to VCR and then hit the menu button.  Look at 4. AV In/Out Setup and make sure your DV Out is set to ON.  I think this will make it work.  If not, try changing your playback functions.  I think the problem either lies with the fact that the camera is using its RCA connections as outputs instead of inputs, or it's not sending the signal on to the VCR.
Hope this works for you -

may be the flex wire is already cut that's why there no image appearing in lcd panel...