How do you get a sanyo tv off of video mode without remote?

Try getting a universal remote, not all functions are accessible through console

If you need further help, reach me via phone at https://www.6ya.com/expert/frankie_091f536560a54e12

The best thing to do of course is to get a remote. If you are in video mode and I take it that is where you are playing video xbox, check the front of the set for a VIDEO button or a MODE button. You may not be able to do much without the remote.

you should have an input button. if so press the button until you get to the input that your dvr/vcr player is on. if you do not have a input button got to the menu button and you should be able to change the input thru the menu.

Go push menu button on the front of tv or the right side.Pick the video out,or tv.Or buy a remote.Website 1-800-Remotes factory Original.For the original remote.

Look for a button named AV or Input or something of the like. Press the button to toggle between different video modes such as AV, TV, S-Video etc.,

no you require the remote or a universal remote or sometimes a cable remote that has been programmed to work the volume on the tv set will have an input button .

not really sure about this but if you put a disk in then run auto scan for your channels,long shot but worth a try.

I am relentless when it comes to problems like this. I had the same problem with my TV being stuck in video mode. I found out that there is a reset button......It's on the @*&#^&^ original remote!!!!! So I tried programming my Time Warner Scientific Atlanta AT8550 remote for the TV to see if the "video source" button would work. IT WORKED!!!! You have to use code 1062. Instructions are:

1. Turn the TV on.
2. Press and hold select and the TV keys until the lights blink twice.
3. Enter 1062. All mode keys blink twice to indicate that the code was accepted.
4. Point the remote at the TV and press power to test the TV.
5. You can then successfully use the "Video Source" button on the bottom left of the remote to change the video mode. VOILA!!!

If you don't have a Scientific Atlanta AT8550 remote, I'm sure you know someone that does. They're everywhere!

Yippie, I figured out a solution that worked!!! I have a univeral remote from comcast, on that remote near the bottom left is a small button that says (input) tv/vcr, press that one time and whala!! the tv video screen was gone, I had to manually change the channel from the tv channel button on the unit. once I changed the channel to 3, my universal remote worked... the button is the second one from the bottom left... I was on hold with sanyo for a long time and just kept trying on my own, so good luck!!!!

Nope. Remote control is required... However some universal remotes come with this button available in the preprogrammed code. I had a cheap GE universal remote that I used to replace the original when my 2 year old smashed it. I now have a sony universal remote and it's default code (one of them) for Sanyo tv's also works for the video/input button.